Guide to buying battery cable to car battery
Sometimes the car battery has a problem and the car does not start for any reason. One of the best ways to start a car with a dead battery without replacing the battery is battery to car battery. But we need special cables for connecting the battery to the battery. In this article, we are going to review the guide for buying the battery cable to the car battery.
Different types of battery cables to car batteries
But the cables that are suitable for the battery to the car battery and are placed in the guide for buying the battery to the car battery; There are different types that are divided based on the characteristics of current flow and car battery amperes. Among these types, we can mention:
Suitable cable for 500 amp batteries
Battery to battery wire for 600 amp batteries
Cables suitable for 800 amp car batteries
Special cables for 1000 amp batteries
Each of these cables should be purchased according to the battery so that you can do a good battery to battery. Of course, in the meantime, it should be noted that the most important feature of the cables is that their core must be made of copper, and the copper metal used in it must be completely pure. This issue, which is accompanied by aluminum in order to increase its amperage, is only a deception. What points should be paid attention to when buying a cable from a battery to a car battery? In order to be able to connect a battery to a battery well, you must consider the characteristics of the desired cable. Consider it good. One of the main features that should be considered for the cable is: Cable length for battery to battery. Cable length is one of the most important things that you should consider. Because if its length is shorter than expected, you cannot easily perform battery to battery operation. Of course, you can also place the second car near the first car, but it is necessary to at least observe the cable, which of course is not long, it increases the energy loss. The most suitable length for the battery to battery cable is between 1.5 and 2 meters. which has low energy loss and is very suitable in conditions such as freezing where it is not possible to park close to each other.
Battery cable material
It is very important to consider the type of battery cable to buy. High-quality cables in the market are made of copper because copper metal has higher conductivity and economy than aluminum. Of course, in the market, cables with copper coating are also offered, which do not have the quality required for a perfect battery.
Insulation of the battery clamp
Another issue that you should pay attention to when buying a cable is that the cable clamps must have an insulated handle.
Standard color for positive and negative cables
Battery cables to standard batteries for cars have two colors:
red
black
These two colors each symbolize a pole. Red color is used for the positive pole and black color is used for the negative pole of the battery. Therefore, when buying, you should be careful to ensure that the battery has the correct standard.
Suitable diameter for cable
Another issue that plays an important role during the flow transfer; is the diameter of the cable. The diameter of the battery cable to the battery is important, because if it is not the right size, it can greatly increase the energy loss and cause the battery to not charge properly or put too much pressure on the battery and alternator of the second car. Therefore, it is necessary to pay enough attention to the proper diameter of the cable when buying a car battery. Normally, the diameter between 4 and 6 is very suitable for copper cables that are used for normal cars.
The importance of choosing the right material for the connection clip
Another thing that should be mentioned in the guide for buying a battery cable for a car battery is the type of connection clips. The connection clamps must have the right material so that the connection between the two batteries can be done well to transfer the current. The connection clamps are called Susmari clamps, which are available in the market in two materials, copper and aluminum. The copper material for the battery cable clamp is better for the car battery, since copper has a high electrical conductivity, of course, it is chosen so that you can conduct electric current. direct more to the defective battery and it has more efficiency and less energy loss. The aluminum material of the aluminum clip has a lower quality than the copper material, but it can still be done battery to battery.
The importance of the strength of the clamp spring
The cable clip has a spring that is responsible for holding the two ends when connecting to the battery head. Therefore, you must be sure of its strength so that it does not cause you concern when it suddenly separates in sensitive times.
Battery to battery guide
After the guide for buying the battery cable to the car battery, it’s time for the principle of the battery to charge the car. But this work requires a separate guide and professional training.
final word
In order to be able to use a suitable and special cable for the battery to the car battery, you need a guide for buying a battery cable to the car battery. Therefore, in this article, this issue and the suitable cable for the battery to the car battery, for which characteristics such as material, length, etc., should be considered.
Frequently asked questions guide for buying battery cable to car battery
Where can I get the battery to battery cable?
It is better to go to reputable stores to get this cable to avoid buying fake cable.
Can the battery cable be made?
Yes, but it can be obtained in a much more economical way than stores.
Do different cables have a different effect on the battery?
Yes, depending on the quality of this stream, it can increase or decrease.
اشتراک گذاری
